Double side glass edging machine /straight-line glass edging machine
Description:
1).This machine is used for two side edge of flat glass for rough grinding, fine grinding, top chamfer, bottom chamfer, upper chamfer polishing, bottom chamfer polishing, flat edge polishing. The grinding head motor seat sliding adopts double linear guide rail, double ball wire rod transmission, to achieve stable movement speed, eliminate movement clearance, reduce resistance and wear, ensure repeated positioning, set the processing parameters once completed.
2. Main technical parameters
Parameters |
Model specifications |
YG-4225 |
Number of spindles on each side ( pc ) |
11/11 |
Transmission speed(m/min) |
0-8m/min |
Width adjustment speed (m/min) |
25 m/min |
Thickness of glass processing(mm) |
2-25mm |
Glass Min. width (mm) |
400mm |
Glass Max. width (mm) |
4200mm |
Chamfer width ( mm ) |
1-3mm |
Chamfer tolerance ( mm ) |
≤0.2mm/m |
Parallel tolerance of processing glass ( mm ) |
≤0.2mm/m |
Diagonal tolerance of processing glass ( mm ) |
≤0.5mm/m |
Installed power(kW) |
45 KW for each set |
Voltage(V) |
380V / 50Hz or customized |
Polishing |
Auto compensation |
Low-e deletion |
Standard |
Sleeping mode |
Standard |
Energy-saving |
Standard |
Allowance for compensation (Secondary Detection) |
Standard |
Diagonal correction |
Standard |
Compressed air input(Mpa) |
0.4--0.8 |
Overall noise (measured from the body 1m) |
70dB |
Temperature |
-10-50ºC |
Humidity |
20-95%RH |
Contact information
Lisa Jiang